Last Update date : Jun 03. 2022
If you enjoy using your Galaxy buds, including newer models like the Galaxy Buds2, you should make sure to clean and care for them regularly. Dust, earwax, and other debris can accumulate in the earbuds and make audio seem muffled, or prevent the earbuds from charging correctly.
Note: Information provided applies to devices sold in Canada. Available screens and settings may vary for earbuds sold in other countries. When cleaning the earbuds, do not hold the earbuds upright, and do not use liquids like alcohol or soapy water when cleaning them to prevent debris or liquids from falling inside them.
Clean your Galaxy BudsClick to Expand
Before wearing your Galaxy Buds, be sure to clean and dry the inside of each ear thoroughly. You should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case.
Remove the earbud tip. Carefully slide off the earbud tip. To prevent damage, do not use force to detach the earbud tip from the earbud.
Clean the earbud tip and the mesh covering on the speaker. Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds and the earbud tip.
Wipe inside the earbud tip with a soft, dry cloth to remove dust, earwax, or oil from the mesh part of each earbud receiver. Avoid using a metal or wire brush when cleaning the earbuds, as the harsh bristles may damage them.
Attach the earbud tip to the earbud. After cleaning is complete, properly assemble the earbud tip on the earbuds. Cover the latch at the bottom of the earbuds with the earbud tip.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Note: There may be low or poor audio quality if debris and foreign materials build up in the earbud tip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
Clean your Galaxy Buds2Click to Expand
Are your Galaxy Buds2 a little dusty? Be sure to clean and dry them prior to wearing them again. You should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case or your ears.
Remove the earbud tip. Carefully slide off the earbud tip. To prevent damage, do not use force to detach the earbud tip from the earbud.
Clean the earbud tip and the mesh covering on the speaker. Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds and the earbud tip.
Wipe inside the earbud tip with a soft, dry cloth to remove dust, earwax, or oil from the mesh part of each earbud receiver. Avoid using a metal or wire brush when cleaning the earbuds, as the harsh bristles may damage them.
Attach the earbud tip to the earbud. After cleaning is complete, properly assemble the earbud tip on the earbuds. Cover the latch at the bottom of the earbuds with the earbud tip.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Note: There may be low or poor audio quality if debris and foreign materials build up in the earbud tip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
Clean your Galaxy Buds+Click to Expand
Make sure to clean and dry the inside of your ears before wearing your Galaxy Buds+. You should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case.
Remove the earbud tip. Carefully slide off the earbud tip. To prevent damage, do not use force to detach the earbud tip from the earbud.
Clean the earbud tip and the mesh covering on the speaker. Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds and the earbud tip.
Wipe inside the earbud tip with a soft, dry cloth to remove dust, earwax, or oil from the mesh part of each earbud receiver. Avoid using a metal or wire brush when cleaning the earbuds, as the harsh bristles may damage them.
Attach the earbud tip to the earbud. After cleaning is complete, properly assemble the earbud tip on the earbuds. Cover the latch at the bottom of the earbuds with the earbud tip.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Note: There may be low or poor audio quality if debris and foreign materials build up in the earbud tip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
Clean your Galaxy Buds ProClick to Expand
Your Galaxy Buds Pro - along with the inside of your ears - should be cleaned and dried before you wear the earbuds. You should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case.
Remove the earbud tip. Carefully slide off the earbud tip. To prevent damage, do not use force to detach the earbud tip from the earbud.
Clean the earbud tip and the mesh covering on the speaker. Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds, the earbud tip, and the air ducts.
Wipe inside the earbud tip with a soft, dry cloth to remove dust, earwax, or oil from the mesh part of each earbud receiver. Avoid using a metal or wire brush when cleaning the earbuds, as the harsh bristles may damage them.
Attach the earbud tip to the earbud. After cleaning is complete, properly assemble the earbud tip on the earbuds. Cover the latch at the bottom of the earbuds with the earbud tip.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Note: There may be low or poor audio quality if debris and foreign materials build up in the earbud tip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
Clean your Galaxy Buds LiveClick to Expand
For the best audio experience, you’ll need to regularly clean the Galaxy Buds Live. All you need is a cotton swab to wipe away any debris. Remember, you should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case.
Remove the wingtip by carefully sliding it off. To prevent damage, do not use too much force.
Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds and the wingtip.
Wipe the mesh part of each earbud receiver with a soft, dry cloth to remove dust, earwax, or oil. Avoid using a metal or wire brush when cleaning the earbuds because the harsh bristles may damage them.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Reattach the wingtip to the earbud.
Note: There may be low or poor audio quality if debris and foreign materials build up in the wingtip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
Clean your Gear IconX earbudsClick to Expand
To avoid sound problems, be sure to clean and dry your ears and your earbuds before wearing your Gear IconX. You should only wear the earbuds in dry conditions, and they should be clean before placing them in the charging case.
Remove the earbud tip. Carefully slide off the earbud tip. To prevent damage, do not use force to detach the earbud tip from the earbud.
Clean the earbud tip and the mesh covering on the speaker. Use a cotton swab and dry brush to remove any debris and foreign materials from the earbuds and the earbud tip.
Wipe inside the earbud tip with a soft, dry cloth to remove dust, earwax, or oil from the mesh part of each earbud receiver. Avoid using a metal or wire brush when cleaning the earbuds, as the harsh bristles may damage them.
Attach the earbud tip to the earbud. After cleaning is complete, properly assemble the earbud tip on the earbuds. Cover the latch at the bottom of the earbuds with the earbud tip.
Use a cotton swab to clean the charging contacts and sensor on both earbuds and the contacts inside the charging case.
Note: There may be low or poor audio quality if debris and foreign materials build up in the earbud tip or on the mesh. When sweat or liquid is on the charging contacts, dry them thoroughly with a clean, soft cloth to prevent corrosion.
- Connect your Galaxy Buds to a phone or another device
- Pair your Galaxy Buds to your Samsung smartwatch
- How to make touch command on Galaxy Buds Live
Please click the submit button below to share your feedback with us. Thank you for your participation.
Thank you for your feedback!
Please answer all questions.
Contact Info
Online
There are a number of a different ways of contacting us via Live Chat, Text, Email and more.
Chat Support: 24/7
Learn moreChat with Us
Sign Language Support
ASL & LSQ Sign Language Interpretation Service For Samsung Technical Support*
Learn More
Call
Speak to one of our dedicated team of experts.
Mon-Sun: 9 AM – 9 PM (EST)
View more
1-800-726-7864
1-800-SAMSUNG
Call now
Apps & Services Customer Support
Samsung Pay:
1-800-SAMSUNG (726-7864)
OR 1-844-SAMPAYS (726-7297)
Bixby: 1-800-SAMSUNG (726-7864)